MIL-PRF-11264F
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirement documents cited in sections 3 and 4 of this specification, whether
or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the solicitation or contract (see 6.2).
FEDERAL SPECIFICATIONS
A-A-208
- Ink, Marking, Stencil, Opaque (Porous and Non-Porous
Surfaces).
(Unless otherwise indicated, copies of the above specifications and standards are available from
the Document Automation and Production Service, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094 or https://assist.daps.dla.mil/quicksearch/).
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the solicitation or contract (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D951
- Standard Test Method for Water Resistance of Shipping
Containers by Spray Method.
ASTM D4169 - Containers and Systems, Shipping, Performance Testing Of.
(Copies of ASTM publications may be obtained from the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or www.astm.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business