MIL-PRF-11264F
3.3.8.5 Metal plates. Metal plates imprinted with the information specified in 3.3.8.2.1,
3.3.8.3.1, 3.3.8.4.1.1, or 3.3.8.4.1.2 may be used in lieu of stenciled markings. The plates shall
be a minimum of 150 mm (6 in.) by 230 mm (9 in.). They shall be attached to the container in a
secure manner, such that accidental loosening will not occur.
3.3.9 Interchangeability. Each container shall be constructed to insure that its cover
assembly and base are interchangeable with the cover assembly and base of every other container
of the same design for the same item, contract and manufacturer (see 4.6.7)
3.4 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. Unless otherwise specified (see 6.2), first article inspection
shall be performed on one container of each type produced under the production contract, when a
first article sample is required (see 3.1). This inspection shall include the examinations of 4.4
(see table I) and the tests of table II.
4.3 Conformance inspection. Conformance inspection shall include the examinations of
4.4 and the tests of 4.5.
4.4 Examination.
4.4.1 Sampling plan. Unless otherwise specified (see 6.2), the sampling plan specified
herein shall be used.
4.4.1.1 Lot formation. An inspection lot shall consist of all containers of a single type,
from an identifiable production period, from one manufacturer, from one manufacturing location,
submitted at the same time for acceptance.
4.4.1.2 Sample. The sample for conformance inspection examination and acceptance
tests shall be randomly selected from the inspection lot in accordance with table III.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business